GROUNDWATER SUPPLIES
Groundwater is both an important direct source of supply that is tapped by wells and
a significant indirect source, since surface streams are often supplied by subterranean
water.
Near the surface of the earth, in the zone of aeration, soil pore spaces contain both
air and water. This zone, which may have zero thickness in swamplands and be several
hundred feet thick in mountainous regions, contains three types of moisture. After a
storm, gravity water is in transit through the larger soil pore spaces. Capillary water is
drawn through small pore spaces by capillary action and is available for plant uptake.
Hygroscopic moisture is water held in place by molecular forces during all except the
driest climatic conditions. Moisture from the zone of aeration cannot be tapped as a
water supply source.
Water Supply  109
In the zone of saturation, located below the zone of aeration, the soil pores are
filled with water,  and this is what we call groundwater. A stratum that contains a
substantial amount of groundwater is called an aquifer. At the surface between the
two zones, called the water table or phreatic sugace, the hydrostatic pressure in the
groundwater is equal to the atmospheric pressure. An aquifer may extend to great
depths, but because the weight of overburden material generally closes pore spaces,
little water is found at depths greater than 600 m (2000 ft).
The amount of water that can be stored in the aquifer is the volume of the void
spaces between the soil grains. The fraction of voids volume to total volume of the soil
is termed porosity, so that
Porosity = (Volume of voids)/(Total volume).  (6.1)
However, not all of this water is available because it is so tightly tied to the soil particles.
The amount of water that can be extracted is known as speciftc yield, defined as the
percent of total volume of water in the aquifer that will drain freely from the aquifer.
The flow of water out of a soil is illustrated in Fig. 6-2 and analyzed using the
continuity equation, as

International Standard Book Number-10: 0-8493-9843-6 (Hardcover) International Standard Book Number-13: 978-0-8493-9843-8 (Hardcover) This book contains information obtained from authentic and highly regarded sources. Reprinted material is quoted with permission, and sources are indicated. A wide variety of references are listed. Reasonable efforts have been made to publish reliable data and information, but the author and the publisher cannot assume responsibility for the validity of all materials or for the consequences of their use. No part of this book may be reprinted, reproduced, transmitted, or utilized in any form by any electronic, mechanical, or other means, now known or hereafter invented, including photocopying, microfilming, and recording, or in any information storage or retrieval system, without written permission from the publishers. For permission to photocopy or use material electronically from this work, please access www.copyright.com (http://www.copyright.com/) or contact the Copyright Clearance Center, Inc. (CCC) 222 Rosewood Drive, Danvers, MA 01923, 978-750-8400. CCC is a not-for-profit organization that provides licenses and registration for a variety of users. For organizations that have been granted a photocopy license by the CCC, a separate system of payment has been arranged. Trademark Notice: Product or corporate names may be trademarks or registered trademarks, and are used only for identification and explanation without intent to infringe.